​Suggestions for Dealing with Wetness

Controlling the natural drying of your property must begin in the attic, which is located at the top of the home and separates the roof from the remainder. The following suggestions can help you avoid water damage to your ceilings and floors, as well as to common attic appliances, insulation, vents, and recessed lighting canisters.

Make a point of checking your attic on a regular basis to make sure everything is in functioning shape.

a foundation, a roof, and a wall

In the attic, it's important to glance both ways up and down. Roof openings, such as pipes, vents, and the chimney, should be given special attention. Make sure the area is dry and free of mold and decay by performing a thorough inspection. Also check the rafters and sheathing at the bottom of the roof. First thing in the morning is the best time to inspect the roof to ensure that it is adequately sealed and that no daylight enters through roof cracks. By examining the floor, you can ensure that it is dry.

Recessed Lighting Canisters

Corrosion and rust are telltale signs of moisture ingress and an electrical risk, respectively. Stains on the insulation around the canisters, as well as above or near the wood, are additional indications of likely water damage. Replace old recessed light canisters with newer, safer canisters that include built-in insulation for safety.

Vents

It is impossible to stress the importance of proper attic ventilation. Near the apex of the roof, vents are frequently seen. There is a need to find and rectify the source of moisture near vents if there is moisture or discoloration in the area. examine the roof for any bird nests or other debris that may be obstructing the ventilation system, and remove it.

Insulation

Moisture and water cause the insulation to shrink and flatten. The insulation should be checked frequently, especially after the rainy season. It's there. As soon as you notice that something is wet, find the cause and remedy the problem immediately. Water-logged insulation is useless, but it can retain moisture for a long time, leading to mold growth. If the insulation is wet, it needs to be changed out.

Items Discovered in the Attic

Regularly inspect and maintain HVAC systems, swamp coolers, and attic air conditioners. Make sure there are no signs of wear and tear, and that the connections are secure. Look around and beneath these appliances. Remember that broken appliances might lead to water damage in the area below.

​It's a Tough Job Insulating the Attic.

Insulation in your attic is designed to retain the heat in your home during the winter and keep the heat out during the summer. Because hot air rises, your furnace's hot air will rise and depart through your attic in the winter. Your attic may become the hottest place in your house during the summer since there is no way for the hot air to escape from the roof, which is quite hot. If you don't have attic insulation, that heat will quickly find its way into your house.

As a result, your home's attic has the most critical amount of insulation. Your insulation choice is also important because not all of them are the same.

Fiberglass batt insulation is by far the most prevalent type of attic insulation. It's easy to put in place between your ceiling joists and doesn't take up much space. A lot of heat can escape through gaps if the batts aren't firmly inserted into all the cracks and crevices.

Fiberglass batts provide less insulation when there is moisture in your attic. Any leaks, condensation, or other sources of moisture must be remedied prior to the installation of batt insulation.

Loose-fill fiberglass and cellulose are also common attic insulation options. By using a blower or a hand-held blower, loose-fill insulation can be blown into tight spaces like corners and other hard-to-reach areas, resulting in fewer gaps. To prevent the destruction of loose fill by moisture, all moisture issues must be remedied prior to installation of the product.

For attic insulation, spray foam is becoming increasingly popular. It not only goes into hard-to-reach places, but it also expands to fill in any cracks or crevices in the insulation, keeping the heat from escaping.

Additionally, spray foam expands, preventing little amounts of moisture from escaping. Condensation isn't an issue with spray foam because of how well it closes your attic.

Other spray foam benefits include structural support, fewer airborne pollutants and allergens in your home, and reduced noise from the outside environment.

Whether you're looking for insulation in your attic or crawlspace, we can help! As one of the most critical regions to insulate, don't delay. Getting in touch with one of our representatives is easy.